Fisher Paykel DE4024P1 User's Guide download pdf (Page 25)

DRYING CYCLE OPTIONS

Delay Start

The ‘Delay Start’ option enables you to delay the start of the drying cycle from between

5minutes and 12hours. Times you can select are 5min, 15min, 30min, 1hour, then

hourly up to 12hours. This can be useful to time your drying to finish when you arrive

home from work, or to start when power rates are lower.

To programme a ‘Delay Start’, simply touch the ‘More’ button to increase the delay

time and ‘Less’ button to decrease the time or to turn ‘Delay Start’ off. Touch

to confirm your selection and start the countdown. Once the ‘Delay Start’ has been

started, the time will count down on the digital display in one minute increments, the

‘DelayStart’ light will flash and the light will stop flashing and turn on solid.

Note: if you hold the ‘More’ button down, the time displayed on the screen will

increase after every half a second (more convenient than touching the button

repetitively). To remove a ‘Delay Start’ time once it is counting down, simply touch ,

then touch the ‘Less’ button to decrease the time to zero. Touch to start the cycle

immediately.

IMPORTANT!

We suggest that you avoid using ‘Delay Start’ for damp, non-colorfast items as this

may cause dye run to occur.

Customizing dryer cycles

After using your dryer a few times you may discover there are some drying options you

prefer for some cycles.

You can programme your dryer to remember the drying options you prefer for each

drying cycle. For instance, you may want to set the ‘Perm Press’ cycle to a lower drying

temperature or set the ‘Everyday’ cycle so it automatically has the ‘Wrinkle Free’ option

selected.

To customize a cycle:

Press ‘POWER’ to turn the machine on.

Turn the dial to select the cycle you wish to customize.

Touch and hold any of the drying options buttons for 3seconds. The lights will flash on

and off to indicate that the machine is in cycle adjustment mode.

Select the drying options you prefer by touching the relevant option button.

Touch to save the selected settings. The dryer will then beep to indicate your

customized cycle has been saved.

Factory reset

You can reset your dryer to the default settings it left the factory with:

Turn the dial to select the ‘Freshen’ cycle.

Touch and hold the ‘Delay Start’, ‘More’ , the ‘Delay Start’, ‘Less’ and ‘Signal’

buttons together for three seconds.

Your dryer will now be reset to the default settings.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

No comments

Fisher Paykel DE4024P1 User's Guide Page 25