Fisher Paykel DE4024P1 User's Guide download pdf (Page 33)

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES WHAT TO DO

The ‘Dry’ dryness

level was chosen

but load is still

damp.

Load consists of a mixture

of heavy and light fabrics.

When combining heavy and light

fabrics in a load, choose a higher

dryness level.

Lint filter, condenser, and/

or air intake vent located

on the front of the dryer is

blocked.

Inspect and clean lint filter,

condenser, and/or air intake vent

located on the front of the dryer.

Dryness sensors are dirty. Clean the sensors with a moist cloth.

These are the metal ribs located in

the drum behind the lint filter.

Control buttons

not responding.

Controls accidentally put in

service mode.

Press

Controls accidentally put in

‘Keylock’ mode.

Hold the

button for 3seconds to

unlock the dryer.

Controls performed an

incorrect operation.

Check the building’s fuse/circuit

breaker box and replace fuse or

reset breaker. Note: electric dryers

use two fuses or breakers.

Dryer doesn’t

start.

Control panel is “asleep”. This is normal. Press ‘POWER’ to

activate the control panel.

Dryer is unplugged. Make sure the dryer plug is pushed

completely into the outlet.

Fuse is blown/circuit

breaker is tripped.

Check the building’s fuse/circuit

breaker box and replace fuse or

reset breaker. Note: electric dryers

use two fuses or breakers.

Dryer was accidentally

paused when starting ‘Delay

Start’.

If the light on the

button is

flashing, the dryer is paused. Press

to restart the countdown.

Water tank is full. If the ‘Water Tank’ light is on, you

must empty the water tank before

the dryer will start. Refer to the

‘Caring for your dryer’ section

for instructions on emptying the

watertank.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

Comments to this Manuals

No comments

Fisher Paykel DE4024P1 User's Guide Page 33

Comments to this Manuals

Related products and manuals for Tumble dryers Fisher Paykel DE4024P1