Fisher & Paykel DD24ST User Manual download pdf

Important!

SAVE THESE INSTRUCTIONS

The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our

website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

SAFETY AND WARNINGS

DishDrawer®

Installation instructions

US CA

DD24ST models

Important safety instructions!

Installation of this DishDrawer® requires basic mechanical and electrical skills.

Be sure to leave these Instructions with the Customer.

Installation must comply with your local building and electricity regulations.

At the completion of the DishDrawer® installation, the Installer must perform

Final Check List.

Remove all packaging materials supplied with the DishDrawer®.

This DishDrawer® is manufactured for indoor use only.

Ensure all water connections are turned OFF. It is the responsibility of the plumber and

electrician to ensure that each installation complies with all Codes and Regulations.

The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required.

The switched power outlet must be outside the DishDrawer® cavity so that it is accessible after

installation.

Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to

the power supply cord.

If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid

damage from water spillage.

Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not

be reused.

Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims.

If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle,

boat or mobile facility containing the product to the service shop at your expense or pay the service

technician’s travel to the location of the product.

WARNING!

Electrical hazard

Before installing the DishDrawer®, remove the house fuse or open the circuit

breaker.

If permanently connecting the DishDrawer®, be sure the power is isolated and

the DishDrawer® unplugged.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped with a cord having

an equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and grounded in accordance

with all local codes and ordinances. WARNING - Improper connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with

a qualified electrician or service representative if you are in doubt as to whether

the appliance is properly grounded.

If the DishDrawer is installed as a permanently connected appliance:

GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded

metal, permanent wiring system, or an equipment-groounding conductor must

be run with the circuit conductors and connected to the equipment-grounding

terminal or lead on the appliance.

Do not modify the power supply plug provided with the appliance - if it will not

fit the outlet, have a proper outlet installed by a qualified electrician. Do not use

an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Cut hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

(1,1) -1- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:15 PM

1 2 3 4 5 6 7 8 9

Summary of Contents

Page 1 - Installation instructions

Important! SAVE THESE INSTRUCTIONSThe models shown in this document may not be available in all markets and are subject to change at any time. For

Page 2 - (inches (mm))

23PRODUCT DIMENSIONS CABINETRY DIMENSIONSABCEDFGHJPrefinished Flat door & Integrated models for 18 ⁄”(480mm) cavityPrefinished LCD models &

Page 3 - PARTS SUPPLIED

PARTS SUPPLIEDClamp (1)Wire clip (1)Phillips ⁄” (16 mm) screws (7)1½ ” (38 mm) bottom fixing screws & metal washers (2)Drain hose support (1)Mo

Page 4 - 1 ⁄”

34567788130 mm2121131714151516912111110AEnsure the drawer is removed and then rotated counter-clockwise to prevent kinked hoses.Before refitting the d

Page 5

PREFINISHED FLAT DOOR & INTEGRATED MODELS FOR 18⁄”(480mm) CAVITY ONLY - ATTACH CAVITY BRACKET (SEE SEPARATE INSTRUCTION SHEET SUPPLIED WITH BRAC

Page 6 - SECURE BY DRAWER REMOVAL

ROUTE THE HOSES ROUTE THE HOSES AND MOVE INTO CAVITYATTACH SIDE MOUNTING BRACKETS REMOVE DRAWER889912335214(x2) 230 mm155341 ⁄” (30 mm)Ensure the

Page 7 - The product has three

12133optional(x2) MOVE INTO THE CAVITY SECURE THE DRAWERSECURE THE DRAWER REFIT THE DRAWER10 1011 111 2 3 The product has three pairs of fixing point

Page 8 - PLUMBING AND DRAINAGE OPTIONS

29 ½” - 34 ¾”(750 - 882.5 mm) 1 ½” (38 mm)max. 4 ¾”(120 mm)21416547229 ½” - 34 ¾”(750 - 882.5 mm)3143255436AIf space is limited for fixing, push ho

Page 9 - Spray arm

Check all parts are installed.Ensure product is level, securely fastened to the cabinetry and opens and closes freely. The DishDrawer® must be free to

Comments to this Manuals

No comments

Fisher & Paykel DD24ST User Manual

Browse online or download User Manual for Wire connectors Fisher & Paykel DD24ST. Fisher & Paykel DD24ST User's Manual

Summary of Contents

Comments to this Manuals