Fisher Paykel DE4024P1 User's Guide download pdf (Page 14)

INSTALLATION INSTRUCTIONS

Electrical connection information for electric dryers

For direct wire connections:

WARNING!

Fire Hazard



Use 10 gauge copper wire.



Use a UL-listed strain relief.



Disconnect power before making electrical connections.



Connect neutral wire (white or center wire) to center terminal.



Ground wire (green or bare wire) must be connected to green ground

connector.



Connect remaining two supply wires to remaining two terminals.



Securely tighten all electrical connections.



Replace the terminal block cover.



Failure to do so can result in death, fire or electrical shock.

Grounding instructions

For a permanently connected dryer:

This dryer must be connected to a grounded metal, permanent wiring system, or an

equipment-grounding conductor must be run with the circuit conductors and connected

to the equipment-grounding terminal on the appliance.

WARNING!

Improper connection of the equipment-grounding conductor can result in a risk

of electric shock. Check with a qualified electrician, or service representative or

personnel, if you are in doubt as to whether the appliance is properly grounded.

SAVE THESE INSTRUCTIONS

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

No comments

Fisher Paykel DE4024P1 User's Guide Page 14