Fisher Paykel DD24DI9N Installation Guide download pdf (Page 2)

1 SAFETY AND WARNINGS

WARNING!

Electrical Shock Hazard

WARNING: To reduce the risk of electrical shock, fire, or injury to persons, the

installer must ensure that the dishwasher is completely enclosed at the time

of installation.

Before fitting the front panels and connecting the ‘knock to pause’ module (if

necessary), the installer must ensure that the dishwasher is disconnected from

the power supply.

After installing the front panels, the installer must ensure that the following

components are electrically grounded: the panel bracket and any custom

metal component (e.g. handle) that extends past the rubber seal.

Failure to follow these warnings may result in electrical shock, injury or fire.

Fitting integrated front panels requires access to electrical service areas.

This work must be performed and certified by a qualified electrical service technician.

WARNING!

Electrical Shock Hazard

Before installing the dishwasher, remove the house fuse or open the circuit

breaker. If permanently connecting the dishwasher, be sure the power is

isolated and the dishwasher unplugged.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped with a cord having

an equipment-grounding conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and grounded in

accordance with all local codes and ordinances. WARNING - Improper

connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or service representative if

you are in doubt as to whether the appliance is properly grounded.

If the dishwasher is installed as a permanently connected appliance:

GROUNDING INSTRUCTIONS - This appliance must be connected to a

grounded metal, permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and connected to the

equipment-grounding terminal or lead on the appliance.

Do not modify the power supply plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified electrician. Do

not use an extension cord, adapter plug or multiple outlet box.

Failure to follow this advice may result in electrical shock or death.

WARNING!

Cut Hazard

Take care - panel edges are sharp.

Failure to use caution could result in injury or cuts.

IMPORTANT SAFETY INSTRUCTIONS

●

Installation of this dishwasher requires basic mechanical and electrical skills.

●

Be sure to leave these Instructions with the Customer.

●

Installation must comply with your local building, electricity, and plumbing regulations.

●

At the completion of the dishwasher installation, the Installer must perform the Final

Checklist.

●

Remove all packaging materials supplied with the dishwasher.

●

This dishwasher is manufactured for indoor use only.

●

Ensure all water connections are turned OFF. It is the responsibility of the plumber and

electrician to ensure that each installation complies with all Codes and Regulations.

●

The dishwasher MUST be installed to allow for future removal from the enclosure if service

is required.

●

The switched power outlet must be outside the dishwasher cavity, so that it is accessible

after installation.

●

Care should be taken when the appliance is installed or removed to reduce the likelihood

of damage to the power supply cord and hoses.

●

If the dishwasher is to be relocated from one installation to another it must be kept

upright to avoid damage from water spillage.

●

Make sure only new hoses are used for connection (supplied with the dishwasher). Old

hoses should not be reused.

●

Failure to install the dishwasher correctly could invalidate any warranty or liability claims.

●

If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring

the vehicle, boat or mobile facility containing the product to the service shop at your

expense or pay the service technician’s travel to the location of the product.

●

This dishdrawer is intended for connection to the hot-water supply.

●

Failure to install the dishwasher correctly could invalidate any warranty or liability claims.

●

Ensure the product is not plugged in when fitting custom panels.

●

Installation of custom panels requires basic mechanical and electrical skills.

●

Installation must comply with your local building and electricity regulations.

●

Failure to install the custom panels correctly could invalidate any warranty or liability

claims.

IMPORTANT!

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to

change at any time. For current details about model and specification availability in your country,

please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

1 2 3 4 5 6 7 ... 25 26

Comments to this Manuals

No comments

Fisher Paykel DD24DI9N Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Dishwashers Fisher Paykel DD24DI9N