Fisher Paykel DD24DI9N Installation Guide download pdf (Page 4)

3 OPTIONALLY HARD WIRING PRIOR TO INSTALLATION

3-A REMOVE THE LOWER DRAWER 3-B REMOVE THE ACCESS COVER & REMOVE POWER

Access cover

Clip

Electronics

module

Terminal

Block cover

Remove existing

power cord

1 With a flat-bladed screwdriver, push

in the clips and slide out the access

cover.

2 Unscrew the electronics module

cover.

3 Carefully pull out the electronics

module and rest on the chassis base

out of the way.

4 With a screwdriver, unclip the plastic

harness cover and hinge open.

5 Slide the terminal block cover

sideways to unlock and hinge open

to access the terminal block.

6 Unscrew the Live, Neutral and Earth

wires as shown.

7 Unscrew the three screws on the

base as shown and remove the cord

from the product.

4” (100 mm)

To prevent kinked hoses

Either sit the drawer down on the left

hand side (recommended) or rotate the

drawer clockwise, resting it on its side after

removal.

Press the release tabs

in on either side and

push back to release

drawer from runners.

Lift drawer off runners.

Push drawer

runners back in

on either side.

Push drawer

runners back in

on either side.

Sit the drawer down

Rotate the drawer

clockwise (max. 90

)

and rest on side.

1 2 3 4 5 6 7 8 9 ... 25 26

Comments to this Manuals

No comments

Fisher Paykel DD24DI9N Installation Guide Page 4

Comments to this Manuals

Related products and manuals for Dishwashers Fisher Paykel DD24DI9N