Fisher Paykel DD24DI9N Installation Guide download pdf (Page 8)

6 CUSTOM DRAWER PANEL SPECIFICATIONS

The following calculations assume the top of the upper panel is

aligned with the top of the adjacent cabinetry.

The final panel/cabinetry alignment is achieved by adjusting the feet:

WIDTH OF ALL PANELS

Measure A (the width between adjacent door/drawer fronts)

and write it in the first box below, then complete the equation.

HEIGHT OF THE UPPER PANEL

HEIGHT OF THE LOWER PANEL

Measure C (door/drawer height (or equivalent)) and write it in the

first box below, then complete the equation.

min. 1/16”

(2mm)

Ventilation Gap

(min. 5/16” (8mm))

min. 1/16” (2mm)min. 1/16” (2mm)

min. 1/16” (2mm)

WIDTH OF ALL PANELS

UPPER PANEL

LOWER PANEL

TOEKICK PANEL

HEIGHT OF

LOWER PANEL

HEIGHT OF

UPPER PANEL

Clearance to adjacent

cabinet front

(min. 1/16” (2mm))

(0”/0mm recommended)

(min. 12 1/4” (311mm))

(min. 5/16” (8mm))

(23 7/16”-24 3/16” (596-615mm))

Height of

Upper Panel

Upper Panel extension

Ventilation Gap

Minimum height

DD24DI models:

DD24DTI/DD24DHTI models:

(min 28 1/4” (717mm) +

(min 30” (762mm) +

DD24DI models:

DD24DTI/DD24DHTI models:

WIDTH OF PANEL

HEIGHT OF

UPPER PANEL

HEIGHT OF

LOWER PANEL

15 11/16”

17 3/8”

(398mm)

(442mm)

Note: The ‘upper panel extension’ B allows for the top of the upper

panel to extend above the chassis where required, however a

min. 1/16” (2mm) gap to the countertop must be maintained.

Note: The ‘upper panel extension’ B

allows for the top of the upper panel to

extend above the chassis where required,

however a min. 1/16” (2mm) gap to

the countertop must be maintained.

- 2x =

FRONT PANEL MATERIAL SPECIFICATIONS

●

5/8 - 13/16” (16 - 20mm) panel thickness.

●

Adequately sealed to withstand moisture (122

F/50

C @ 80% RH)

Because of it being a hot and wet environment generally, the back and sides of the

panel should be completely sealed with a waterproof vapor barrier (ie polyurethane)

to prevent damage to the panel.

●

The back of the panel (including any integrated handle) should be completely flush

so that the seal between the panel and the rubber trim is maintained.

●

Installation outside these specs may result in condensation on cabinetry surfaces.

●

Maximum weight of each panel: 20lb (9kg)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comments to this Manuals

No comments

Fisher Paykel DD24DI9N Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Dishwashers Fisher Paykel DD24DI9N