Fisher & Paykel OD301 User Manual download pdf

BEFORE YOU START

PAGE 2 OF 8

New Zealand

Australia

INSTALLATION INFORMATION

TITAN BUILT - IN OVENS

OS301 / OD301 SERIES

It is the customers responsibility to ensure that the product is electrically

connected by a qualified electrical installer and conforms with all local electrical codes.

Failure to install the product correctly could invalidate any warranty or liability claims and lead to prosecution.

Make sure that the oven is located away from any strong and/or hot drafts of air.

The cabinet opening dimensions specified are the absolute minimum. These dimensions allow a clearance of up to 6mm.

The product must be electrically grounded.

We recommend that the outlet for the electrical supply cable is located in the right rear corner of the cabinet cavity.

This allows the electrical supply cable to sit inside the rear chamfered corner of the oven and prevents it being jammed

between the cabinet wall and the rear of the oven.

The oven support surface should be flat, level and be able to support a weight of

at least (190 Kg) for a double oven and (108 Kg) for single oven models.

You will need a No.2 Phillips screwdriver to complete the installation of the oven

into the cabinet. There should be 4 suitable wood screws with this installation kit

(Part number 556075) and 4 spacers (Part number 545455).

Allow at least 1.5m free length of connection cable within the cavity for ease of

installation and service of the oven.

Ensure a suitable disconnection switch is incorporated in the permanent wiring,

mounted and positioned to comply with the local wiring rules and regulations.

PAGE 1 OF 8

P/N 545854C

DATE OF ISSUE

11 / 2003

IMPORTANT - SAVE FOR THE OVEN INSTALLER’S USE

Outlet for

electrical supply

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - INSTALLATION INFORMATION

BEFORE YOU STARTPAGE 2 OF 8New ZealandAustraliaINSTALLATION INFORMATIONTITAN BUILT - IN OVENSOS301 / OD301 SERIESIt is the customers responsibility

Page 2

BEFORE YOU STARTPAGE 2 OF 8New ZealandAustraliaINSTALLATION INFORMATIONTITAN BUILT - IN OVENSOS301 / OD301 SERIESIt is the customers responsibility

Page 3 - RECESSED DIMENSIONS

PAGE 3 OF 8PAGE 4 OF 8PRODUCT DIMENSIONSPROUD DIMENSIONSTOP VIEW681mm - Single1222mm - DoubleInside Cabinet Height724mm InsideCabinet WidthMinimum Dis

Page 4

PAGE 3 OF 8PAGE 4 OF 8PRODUCT DIMENSIONSPROUD DIMENSIONSTOP VIEW681mm - Single1222mm - DoubleInside Cabinet Height724mm InsideCabinet WidthMinimum Dis

Page 5 - PREPARING THE OVEN

WIRING INSTRUCTIONS1. Remove the top panel from the product.2. Feed the oven electrical supply cable through the grommeted hole on the45ocorner at the

Page 6

WIRING INSTRUCTIONS1. Remove the top panel from the product.2. Feed the oven electrical supply cable through the grommeted hole on the45ocorner at the

Page 7 - TROUBLE SHOOTING

PAGE 7 OF 8PAGE 8 OF 8ATTACHMENTCHECKLISTWARNING : Extreme care is to be taken when lifting the product as itis very heavy. Failure to do so may resu

Page 8

PAGE 7 OF 8PAGE 8 OF 8ATTACHMENTCHECKLISTWARNING : Extreme care is to be taken when lifting the product as itis very heavy. Failure to do so may resu

Comments to this Manuals

No comments

Fisher & Paykel OD301 User Manual

Browse online or download User Manual for Ovens Fisher & Paykel OD301. Fisher & Paykel OD301 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Ovens Fisher & Paykel OD301