Fisher Paykel RS36W80LJ1N User Manual download pdf (Page 33)

PlasticAluminum

For 80” (2032 mm) cavity installation only

Measure 4” (102mm) from the top, shorter side trim

and carefully cut using a fine tooth hacksaw to a

length of 76“ (1930mm). Referto A for orientation

of side trim.

Note: ensure cut is straight and square as this is an

exposed surface. Also ensure the plastic part does

not bend as this can causevisual stress marks.

Repeat this process for the remaining sidetrim.

IMPORTANT!

Before installing your appliance, ensure the dimensions of the finished enclosure are correct for your appliance following the‘Product and cavity dimensions’ sections.

@0 ATTACH SIDE TRIM BRACKETS – (A) FLEXIBLE SPRING CLIP METHOD

TWO METHODS ARE AVAILABLE FOR ATTACHING SIDE TRIM BRACKETS:

(A) FLEXIBLE SPRING CLIP METHOD – RECOMMENDED METHOD

(B) FIXED SCREW METHOD – METHOD TO USE IF CABINET IS NOT TO SPECIFICATION

(Attempt method A. If method A results in poor fitment of side trims due to cabinetry that is uneven or out of specification, use method B).

Position 3 side trim brackets onto each side trim.

Note: measure from the top of the trim, with the

shorter lip at the bottom. (Refer to B for 80” and

84” bracket locations and trim orientation).

IMPORTANT!

Each bracket has two engagement points for the

side trim to locate. Ensure the trim is engaged in

both points (refer to C).

Repeat this process for the remaining side trim.

Break off the datum lip to each side

trim bracket and discard.

Repeat for all side trim brackets.

80” = 9” (229mm)

84” = 13” (330mm)

80” = 36” (914mm)

84” = 40” (1016mm)

80” = 65” (1651mm)

84” = 69” (1753mm)

Discard

Top view of side trim engaged

correctly in side trim bracket

Side trim

bracket

Side trim

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Fisher Paykel RS36W80LJ1N User Manual Page 33

Comments to this Manuals